INFRARED THERMAL CAMERA INSPECTIONS
   
FLIR THERMOGRAPHY CAMERA


 
Water Intrusion - On left side of floor-to-ceiling windows


               Water leaking into condo ceiling from leaking window frame              

 
Water Intrusion from unit above draining into kitchen of the
apartment below. To the left of the fridge and into cabinets


Water Intrusion from unit above draining into kitchen of the 
apartment below. To the left of the fridge and behind cabinets  

   
Laser Particle Counter - Laser Pinted Hygrometer
 
Fiber Optic Boroscope - Survey Master Protimeter
     
 
Call:  305.571.2280

Mold Detection Services, Inc. will inspect and test for mold in
homes, apartments, workplaces, commercial properties, boats,
and anywhere else mold grows.

A certified mold inspector, utilizing the best equipment available
in the industry (Infrared Cameras, Laser Particle Counters, Etc.),
will carry out every inspection. We use only digitally calibrated,
custom made indoor air quality testing pumps to ensure you
receive only accurate results. Consequently, our clients will
receive the highest quality service.

Our services include a thorough inspection (utilizing Infared
Thermal Imaging, Laser Particle Counters, Certified Mold
Dogs™) and follow-up testing (air samples, swabs and glass
slides), accompanied by an extensive report. In addition, we
will be working with a nationally recognized lab, dedicated to
the production of accurate data, via high-quality equipment,
and staffed with professionals specialized in this field.

We will not be involved in the remediation of any mold problems,
since this would be a CONFLICT OF INTEREST. We do offer
Mold Consulting Services to help you through the remediation
process and to protect your interests. Mold Detection Services
will protect your interest.

Call the South Florida Mold Company You Can Trust!
305-571-2280 or 866-654-MOLD (6653)

Air Sampling - Indoor Air Quality Testing:

Indoor Air Samples are usually performed in order to test for
nonviable (dead) mold spores. Testing for nonviable mold is
done by microscopic examination of the sample to identify
fungal and non-fungal particles that may be allergenic to
individuals. Other particles such as: fiberglass, insect fragments,
rusts, dirts, and more are also detected during non-viable testing.
This is the quickest way to test for airborne mold spores and
other harmful particles.

Testing for viable (living) mold is done by placing the sample
onto agar culture medium that supports the growth of the
organism(s) in question and allows identification of the species
and level of contamination. This takes more time and is more costly.

When colonization occurs one mold has overtaken your entire
home. Colonization is the formation of compact population groups
of the same type of mold species.

We are certified mold remediation consultants that will monitor
the remediation process from start to finish. We start with a full
inspection to pinpoint all of the problem areas, monitor the
remediation process and then perform post remediation
clearance inspection and testing. 

Certified Visual Inspections
Infrared Thermal Imaging Camera Scans
Protimeter Readings For Moisture
ARTI Laser Particle Readings
Fiber Optic Boroscope Exams
Hygrometer Readings- Temp & Humidity 
Certified Mold Dog Alerts
Digital Photographs Detailing Problems

Certifications and Professional Associations

The American Industrial Hygiene Association (AIHA) AIHA promotes, protects,
and enhances industrial hygienists and other occupational health, safety and
environmental professionals in their efforts to improve the health and well being
of workers, the community, and the environment.

Florida Canine Academy, Inc. As Florida Canine Academy certified inspectors,
we have successfully completed over 1000 hours of canine and handler training
in mold detection. Learn more about our Certified MoldDogs™.

Indoor Air Quality Association (IAQA) The Indoor Air Quality Association is a
nonprofit, multi-disciplined organization, dedicated to promoting the exchange
of indoor environmental information, through education and research, for the
safety and well being of the general public. Certified Indoor Environmental
Consultants and Certified Mold Inspectors.

Indoor Environmental Standards Organization (IESO) As the indoor air quality
(IAQ) industry continues to evolve, businesses that are responsible for managing
IAQ issues are adapting to meet the demands of the industry. The Indoor
Environmental Standards Organization (IESO) was established in 2002 to
assist these businesses.

National Association of Mold Professionals (NAMP) As NAMP certified
inspectors, we adhere to the highest standards for conduct and ethics in
dealing with you, the client. These standards are our guideline for conducting
a mold inspection and outline the various components and procedures of a
professional mold inspection. These standards address the purpose, scope
and limitations of the inspection process.

Professional Laboratories, Inc. (Certified Indoor Environmentalist) Staffed
with Certified Indoor Air Quality Professionals, Ph.D. Mycologists, Board
Certified Physicians, Registered Clinical Laboratory Technicians, PRO-LAB
has the necessary experience to assist in any environmental investigation.

National Association of Certified Home Inspectors (NACHI) The National
Association of Certified Home Inspectors (NACHI) promotes a high standard
of professionalism, business ethics and inspection procedures. NACHI
members subscribe to the following Code of Ethics in the course of their
business

Certified Mold Consulting, Mold Testing and Environmental Services Mold
Detection Services, Inc. of South Florida, will test or sample for mold in
homes, apartments, workplaces, commercial properties, boats, and
anywhere else mold grows. Indoor Air Quality, Bulk, Swab, Bio Tape and
Environmental Sample results are generated with in 24 - 48 hours.

A certified Indoor Environmentalist, utilizing the best equipment available
in the industry (Infrared Cameras, Laser Particle Counters, Etc.), will carry
out every inspection. We use only digital calibrated, custom made indoor
air quality testing pumps to insure you receive only accurate results.
Consequently, our clients will receive the highest quality service.

Our inspection services include a thorough inspection (utilizing Infared
Thermal Imaging, Laser Particle Counts, Visual Observations) and follow-up
testing (air samples, bulk, swabs and glass slides), accompanied by an
extensive report. In addition, we will be working with a nationally accredited
laboratory, dedicated to the production of accurate data, via high-quality
equipment, and staffed with professionals specialized in this field.

We will not be involved in the remediation of any mold problems, since
this would be a CONFLICT OF INTEREST. We do offer Mold Consulting
Services to help you through the remediation process and to protect your
interests. We offer Post Remediation Inspection and Testing to confirm
the job has been done correctly. Mold Detection Services will protect you.

Call the South Florida Mold Company You Can Trust!

Call:  305-571-2280 or 866-654-MOLD(6653)

Mold Consulting Services by MDS, Inc.

  

Visit our web partners at:

www.South-Florida-Mold-Consulting-
Testing-Inspection-Services.com

www.StormDamageHelp.com

www.FloridaMold.net

www.Mold-Testing-Services.com

www.Boca-PalmBeach-Mold.com

www.GotMoldFL.com

www.MDSDOG.com

www.Mold-Consulting-Services.com

www.Mold-InspectionServices.com

www.MoldDetectionServices.net